Home › Coverage › Yorkshire › Maltby
YorkshireSolar panels in Maltby,
priced honestly.
Independent guidance on solar and battery storage for Maltby homes in Yorkshire: a free remote design call first, then an MCS-certified installation team for your area if you decide to go ahead. PVGIS puts a roof in Maltby at 977 kWh per kWp a year, 1% above our Yorkshire county estimate.
Start with your postcode
Free, no obligation. Takes about two minutes, and nobody visits your home.
What a roof in Maltby can generate
Real satellite data for Maltby, real installed pricing, and the same honest model we run for every place we cover.
How Maltby compares
Small towns rarely get published solar figures, so here are the numbers for Maltby. It is one of 122 Yorkshire towns we track, and it ranks joint 18th of 122 for solar yield, a town of 16,667 people in the House of Commons Library settlement data. PVGIS gives its roofs 977 kWh per kWp a year, 2.68 peak sun hours a day averaged across the seasons, and the standard 12 panel model turns that into £880 of year one benefit, £247 of it from your own generation and £633 from export at 12p.
Treat these as calibration rather than a quote. The calculator below runs the same model, defaulted to Maltby's own yield, and at Maltby's 977 kWh per kWp it prices a 12 panel system at £6,360 installed before any battery. Your free design call reworks every number for your actual roof, its shading and your usage.
Any planning application in Maltby sits with Rotherham, and its official House of Commons Library settlement class is small town.
The charger is in the installed price but left out of payback: charging savings depend on your mileage and tariff, which the design call models properly.
Price this properly, free →Your real roof, your real usage, on a free video call. No obligation.
A 12 panel, 6.36 kWp system in Maltby generates around 6,214 kWh a year, worth around £880 in year one on the 12p export scenario.
Generation is modelled from PVGIS satellite data for Maltby's own coordinates (53.4253, -1.20321), using the same 26.32p/kWh import value and £1,000 per kWp installed pricing as every Clearline estimate, with the full methodology, sourcing and assumptions set out on our help page.
Solar panel servicing and repair in Maltby
If a system in Maltby is underperforming, start with the guides below: repair benchmarks, service scope, and the inverter question.
Common questions about solar in Maltby
What could a roof in Maltby generate?
PVGIS puts a roof in Maltby at 977 kWh per kWp a year, 2.68 peak sun hours a day averaged across the seasons.
What does a typical solar system cost in Maltby?
A typical 12 panel, 6.36 kWp system in Maltby costs around £6,360 installed, at £1,000 per kWp before any battery.
Would a system in Maltby need a G99 application?
Most home solar and battery systems qualify for the simpler G98 notification, made to the network operator (DNO) after installation rather than before. A minority, usually larger systems, need the fuller G99 process instead. Your design call checks which applies in Maltby before anything is booked; our G98 vs G99 guide explains the difference in full.
What could I earn from exporting in Maltby?
On the 12p export scenario, that 12 panel system sends about 5,277 kWh a year to the grid, worth around £633. The tariff guide compares the export rates that could apply to your setup.
Get your free quote
Takes about two minutes. We work out your options, then confirm your free remote design call, on video, at a time that suits you. It starts with your roof and your numbers, and the design is built around them rather than around a product someone needs to shift.
Reading for Maltby homeowners
Independent, sourced and dated. The same ground we cover on your free call.
Why your inverter is smaller than your panel array, and why that is correct
More panel capacity than inverter capacity is a deliberate design choice.
Read the guide →What a battery gateway actually does
Without a gateway your system shuts down when the grid does. Here is what the box actually does.
Read the guide →What an EV charger installation actually involves
Main fuse, DNO notification, load balancing and the paperwork. What really happens.
Read the guide →What MCS certification actually buys you on a heat pump job
The gate on the £7,500 grant, the design standard behind your running costs, and the noise sign-off.
Read the guide →The price cap explained, and what it does to solar payback
The cap limits unit rates, not bills. That changes what solar payback means.
Read the guide →How to check an MCS certificate is genuine, before the deposit leaves your account
A logo proves nothing. Certification is business specific, technology specific and checkable.
Read the guide →How Maltby compares with its neighbours
Same satellite dataset, same assumptions, so the differences are real geography rather than modelling noise.
| Town | kWh per kWp | Peak sun hours | vs Maltby |
|---|---|---|---|
| Maltby | 977 | 2.68 | — |
| Wickersley and Bramley | 968 | 2.65 | -9 kWh |
| Dinnington (Rotherham) | 976 | 2.67 | -1 kWh |
| Conisbrough | 979 | 2.68 | +2 kWh |
| Warmsworth | 985 | 2.70 | +8 kWh |
| Harworth and Bircotes | 980 | 2.69 | +3 kWh |
| Mexborough | 968 | 2.65 | -9 kWh |
PVGIS v5.2 for each town centroid, identical assumptions throughout. A few kWh either way is weather-year noise; a spread beyond about 30 kWh per kWp is real geography.
Also for Maltby: Solar panels in Maltby from OVO Solar & Battery