Home › Coverage › Essex › Barking and Dagenham
EssexSolar panels in Barking and Dagenham,
priced honestly.
Independent guidance on solar and battery storage for Barking and Dagenham homes in Essex: a free remote design call first, then an MCS-certified installation team for your area if you decide to go ahead. PVGIS puts a roof in Barking and Dagenham at 1,040 kWh per kWp a year, 2% below our Essex county estimate.
Start with your postcode
Free, no obligation. Takes about two minutes, and nobody visits your home.
What a roof in Barking and Dagenham can generate
Real satellite data for Barking and Dagenham, real installed pricing, and the same honest model we run for every place we cover.
How Barking and Dagenham compares
Barking and Dagenham is one of 46 Essex towns we track, and it ranks 35th of 46 for solar yield. The House of Commons Library settlement classification puts it in the core city class, with a population of 231,985, which makes it one of the largest places we publish figures for. Scale changes nothing about the physics: PVGIS gives a roof here 1,040 kWh per kWp a year, 2.85 peak sun hours a day averaged across the seasons, and on the 12p scenario about £247 of the year one benefit comes from solar you use yourself, with export income adding £681.
Treat these as calibration rather than a quote. The calculator below runs the same model, defaulted to Barking and Dagenham's own yield, and at Barking and Dagenham's 1,040 kWh per kWp it prices a 12 panel system at £6,360 installed before any battery. Your free design call reworks every number for your actual roof, its shading and your usage.
Barking and Dagenham sits within Barking and Dagenham, its local planning authority, and the House of Commons Library classes it as a core city.
The charger is in the installed price but left out of payback: charging savings depend on your mileage and tariff, which the design call models properly.
Price this properly, free →Your real roof, your real usage, on a free video call. No obligation.
A 12 panel, 6.36 kWp system in Barking and Dagenham generates around 6,614 kWh a year, worth around £928 in year one on the 12p export scenario.
Generation is modelled from PVGIS satellite data for Barking and Dagenham's own coordinates (51.54342, 0.12953), using the same 26.32p/kWh import value and £1,000 per kWp installed pricing as every Clearline estimate, with the full methodology, sourcing and assumptions set out on our help page.
Solar panel servicing and repair in Barking and Dagenham
Guidance is nationwide, so the benchmarks hold in Barking and Dagenham: repair costs, service scope, and when the inverter is the real fault.
Common questions about solar in Barking and Dagenham
What could a roof in Barking and Dagenham generate?
PVGIS puts a roof in Barking and Dagenham at 1,040 kWh per kWp a year, 2.85 peak sun hours a day averaged across the seasons.
What does a typical solar system cost in Barking and Dagenham?
A typical 12 panel, 6.36 kWp system in Barking and Dagenham costs around £6,360 installed, at £1,000 per kWp before any battery.
Would a system in Barking and Dagenham need a G99 application?
Most home solar and battery systems qualify for the simpler G98 notification, made to the network operator (DNO) after installation rather than before. A minority, usually larger systems, need the fuller G99 process instead. Your design call checks which applies in Barking and Dagenham before anything is booked; our G98 vs G99 guide explains the difference in full.
What could I earn from exporting in Barking and Dagenham?
On the 12p export scenario, that 12 panel system sends about 5,678 kWh a year to the grid, worth around £681. The tariff guide compares the export rates that could apply to your setup.
Get your free quote
Takes about two minutes. We work out your options, then confirm your free remote design call, on video, at a time that suits you. It starts with your roof and your numbers, and the design is built around them rather than around a product someone needs to shift.
Reading for Barking and Dagenham homeowners
Independent, sourced and dated. The same ground we cover on your free call.
What a solar service costs, and how often you actually need one
MCS advises a contractor visit at year 10 on a privately owned home. Most plans sell one a year.
Read the guide →Inside a home battery: capacity, power and losses
Usable capacity, kW output, round trip losses and chemistry, in plain terms.
Read the guide →The main home EV chargers, compared on what actually differs
Eight popular UK home chargers on cable, connectivity, warranty and tariff integration.
Read the guide →Sizing a heat pump: what a proper survey covers
Sized by calculation, not by rule of thumb. What the survey covers, and what guessing costs.
Read the guide →The price cap explained, and what it does to solar payback
The cap limits unit rates, not bills. That changes what solar payback means.
Read the guide →Your MCS certificate: what it shows, when it arrives, and how a Smart Export Guarantee supplier uses it
The document your export payments hang on. Who issues it, what it shows, and how to get a copy.
Read the guide →How Barking and Dagenham compares with its neighbours
Same satellite dataset, same assumptions, so the differences are real geography rather than modelling noise.
| Town | kWh per kWp | Peak sun hours | vs Barking and Dagenham |
|---|---|---|---|
| Barking and Dagenham | 1,040 | 2.85 | — |
| Redbridge | 1,035 | 2.84 | -5 kWh |
| Havering | 1,045 | 2.86 | +5 kWh |
| Newham | 1,027 | 2.81 | -13 kWh |
| Chigwell | 1,032 | 2.83 | -8 kWh |
| Bexley | 1,042 | 2.85 | +2 kWh |
| Greenwich | 1,036 | 2.84 | -4 kWh |
PVGIS v5.2 for each town centroid, identical assumptions throughout. A few kWh either way is weather-year noise; a spread beyond about 30 kWh per kWp is real geography.
Also for Barking and Dagenham: Solar panels in Barking and Dagenham from OVO Solar & Battery