Home › Coverage › Kent › Swanscombe
KentSolar panels in Swanscombe,
priced honestly.
Independent guidance on solar and battery storage for Swanscombe homes in Kent: a free remote design call first, then an MCS-certified installation team for your area if you decide to go ahead. PVGIS puts a roof in Swanscombe at 1,041 kWh per kWp a year, 3% below our Kent county estimate.
Start with your postcode
Free, no obligation. Takes about two minutes, and nobody visits your home.
What a roof in Swanscombe can generate
Real satellite data for Swanscombe, real installed pricing, and the same honest model we run for every place we cover.
How Swanscombe compares
Small towns rarely get published solar figures, so here are the numbers for Swanscombe. It is one of 44 Kent towns we track, and it ranks 39th of 44 for solar yield, a town of 16,899 people in the House of Commons Library settlement data. PVGIS gives its roofs 1,041 kWh per kWp a year, 2.85 peak sun hours a day averaged across the seasons, and the standard 12 panel model turns that into £929 of year one benefit, £247 of it from your own generation and £682 from export at 12p.
Treat these as calibration rather than a quote. The calculator below runs the same model, defaulted to Swanscombe's own yield, and at Swanscombe's 1,041 kWh per kWp it prices a 12 panel system at £6,360 installed before any battery. Your free design call reworks every number for your actual roof, its shading and your usage.
Swanscombe sits within Dartford, its local planning authority, and the House of Commons Library classes it as a small town.
The charger is in the installed price but left out of payback: charging savings depend on your mileage and tariff, which the design call models properly.
Price this properly, free →Your real roof, your real usage, on a free video call. No obligation.
A 12 panel, 6.36 kWp system in Swanscombe generates around 6,621 kWh a year, worth around £929 in year one on the 12p export scenario.
Generation is modelled from PVGIS satellite data for Swanscombe's own coordinates (51.44831, 0.2931), using the same 26.32p/kWh import value and £1,000 per kWp installed pricing as every Clearline estimate, with the full methodology, sourcing and assumptions set out on our help page.
Solar panel servicing and repair in Swanscombe
Guidance is nationwide, so the benchmarks hold in Swanscombe: repair costs, service scope, and when the inverter is the real fault.
Common questions about solar in Swanscombe
What could a roof in Swanscombe generate?
PVGIS puts a roof in Swanscombe at 1,041 kWh per kWp a year, 2.85 peak sun hours a day averaged across the seasons.
What does a typical solar system cost in Swanscombe?
A typical 12 panel, 6.36 kWp system in Swanscombe costs around £6,360 installed, at £1,000 per kWp before any battery.
Would a system in Swanscombe need a G99 application?
Most home solar and battery systems qualify for the simpler G98 notification, made to the network operator (DNO) after installation rather than before. A minority, usually larger systems, need the fuller G99 process instead. Your design call checks which applies in Swanscombe before anything is booked; our G98 vs G99 guide explains the difference in full.
What could I earn from exporting in Swanscombe?
On the 12p export scenario, that 12 panel system sends about 5,684 kWh a year to the grid, worth around £682. The tariff guide compares the export rates that could apply to your setup.
Get your free quote
Takes about two minutes. We work out your options, then confirm your free remote design call, on video, at a time that suits you. It starts with your roof and your numbers, and the design is built around them rather than around a product someone needs to shift.
Reading for Swanscombe homeowners
Independent, sourced and dated. The same ground we cover on your free call.
What a solar service costs, and how often you actually need one
MCS advises a contractor visit at year 10 on a privately owned home. Most plans sell one a year.
Read the guide →Whole home backup or partial backup? The runtime arithmetic
Whole home backup sounds obvious until you do the runtime maths. Here is how to choose the right tier.
Read the guide →What an EV charger installation actually involves
Main fuse, DNO notification, load balancing and the paperwork. What really happens.
Read the guide →How an air source heat pump actually works
It moves heat rather than making it. The cycle, the efficiency numbers and the trade-offs.
Read the guide →Which tariffs are actually built for battery charging
A battery buys cheap and uses dear. The tariff decides how much that is worth.
Read the guide →What MCS certification actually is, and why your export payments depend on it
The badge that decides whether your solar earns export payments. It cannot be added later.
Read the guide →How Swanscombe compares with its neighbours
Same satellite dataset, same assumptions, so the differences are real geography rather than modelling noise.
| Town | kWh per kWp | Peak sun hours | vs Swanscombe |
|---|---|---|---|
| Swanscombe | 1,041 | 2.85 | — |
| Northfleet | 1,052 | 2.88 | +11 kWh |
| Chafford Hundred, West Thurrock and Purfleet-on-Thames | 1,052 | 2.88 | +11 kWh |
| Tilbury | 1,057 | 2.90 | +16 kWh |
| Dartford | 1,039 | 2.85 | -2 kWh |
| Grays | 1,055 | 2.89 | +14 kWh |
| Gravesend | 1,053 | 2.89 | +12 kWh |
PVGIS v5.2 for each town centroid, identical assumptions throughout. A few kWh either way is weather-year noise; a spread beyond about 30 kWh per kWp is real geography.
Also for Swanscombe: Solar panels in Swanscombe from OVO Solar & Battery